SAP CX. Send your marketing and sales teams real buyers.
SAP CX is a family of products. This page covers three of them: SAP Emarsys, SAP Sales Cloud Version 2 and SAP Cloud for Customer. HiveSilo scores the buyers on your own website and writes that evidence to them through the APIs SAP documents.
Start with a conversation. No client records needed.

A new contact arrives in SAP. Is it a buyer?
SAP CX records who the customer is and what your teams did next. It was not on your website to see how that person behaved before they enquired.
What should marketing and sales know before they act on a new contact?
An enquiry form creates a contact in SAP Emarsys or a lead in SAP Sales Cloud with a name, an email address and a source. Two records can look the same while one person shows strong buying intent and the other was never a real buyer. The team that owns the record decides what happens next with whatever context it carries.
SAP provides its own segmentation, automation and lead management, and those remain the starting point. HiveSilo adds evidence from a place SAP does not observe directly: first-party behavior on your own website, scored for buying intent and screened for invalid traffic, then written to the fields and events your administrator chooses.
An SAP CX review should start with the segmentation, automation and lead management already configured in your SAP products. [P706-D01] [P706-D05] [HS3] [HS4]
Put buyer evidence where your SAP teams already work.
HiveSilo does not replace an SAP program or sales process. It supplies a score, a tier and the reasons behind them, so the automation and the follow-up you already run can use them.
Talk through your use case- Who to contact first.
- Order new contacts and leads by observed buying intent, alongside the rules you already run in SAP.
- Which program to start.
- Let an external event you define in SAP Emarsys mark the moment a buyer shows strong intent.
- What to stop paying for.
- See which sources send buyers and which send traffic that never becomes a conversation.
AvailableThe connection is activated for each client on request, inside that client's own SAP Emarsys account or SAP sales tenant, with the fields, events and roles their administrator approves.
How HiveSilo connects to SAP CX
SAP CX holds the customer record and runs your programs. HiveSilo scores buying intent on your own website, screens invalid traffic and writes a Tier 1, Tier 2 or Tier 3 qualification to SAP Emarsys contacts and external events, and to leads in SAP Cloud for Customer, through the APIs SAP documents, under access your administrator grants. Customer identities stay in your SAP account and your own confidential environment. [P706-D02] [P706-D06] [HSF1] [HS4]
What your team sees on the SAP Emarsys contact
- HiveSilo buyer score (custom field)
- 3,790 of 5,000
- HiveSilo qualification (custom field)
- Tier 1
- Source (custom field)
- Website, paid search campaign
- Traffic check (custom field)
- Screened as genuine
External event triggered
Tier 1 buyer on the website
Strong buying intent on your website this week. Traffic screened as genuine. Suggested next step: sales follow-up today.
What HiveSilo sends and the route SAP CX documents
SAP CX is a product family, so each row names the product it covers and a page in SAP's public documentation. HiveSilo calls the SAP API outbound to write these records; it does not ask SAP to call into your systems. In this workflow it does not read contacts, leads or outcomes back from SAP; any read is a separate permission you would grant. For SAP Sales Cloud Version 2 this page states only what SAP's public help pages establish, which is how API access is granted.
| HiveSilo sends | Where it lands in SAP CX | Documented route |
|---|---|---|
| A buyer who identifies themselves on your website | SAP Emarsys: a contact, created or updated | PUT https://api.emarsys.net/api/v3/contact/ with create_if_not_exists set to 1. SAP Emarsys updates the contact, or creates it if it does not exist. [P706-D02] |
| Buyer score, Tier 1, Tier 2 or Tier 3 qualification, campaign and source context | SAP Emarsys: contact fields your administrator selects | The same Update Contacts request body. Custom fields are created in the Field Editor or with POST https://api.emarsys.net/api/v3/field. The key_id value names the field that identifies the contact; a custom field used as the key has to be indexed, which SAP Emarsys handles through a support ticket. [P706-D02] [P706-D08] |
| A high-intent moment for a known buyer | SAP Emarsys: an external event your team has created | POST https://api.emarsys.net/api/v3/event/{eventId}/trigger. The contact must already exist, and an optional trigger_id lets SAP Emarsys process a repeated event only once. [P706-D03] |
| Buyers in a qualification tier, as a group | SAP Emarsys: a contact list your team has created | POST https://api.emarsys.net/api/v3/contactlist/{listId}/add, with the contacts named by key_id and external_ids. One request takes up to 1000 items. [P706-D10] |
| A scored lead for your sales team | SAP Sales Cloud Version 2: within the technical roles assigned to an API user | An administrator creates an API user under Technical Users and assigns technical roles. SAP documents the OAuth 2.0 client credentials flow for inbound API communication. [P706-D05] |
| A scored lead, with score and tier in extension fields | SAP Cloud for Customer: the Lead object | The OData version 2 API at https://<your_tenant>/sap/c4c/odata/v1/c4codataapi. Extension fields for the Lead object are added on the individual lead service. [P706-D06] [P706-D07] |
- Access you grant in SAP Emarsys
- Your account owner creates OpenID Connect API credentials on the Security Settings page and grants the access privileges the calls need. SAP notes that privileges are not all enabled by default and a missing one returns 403 Forbidden. [P706-D01]
- Access you grant in SAP sales products
- SAP Sales Cloud Version 2: an API user with technical roles, which has no access to the application UI. SAP Cloud for Customer: Basic Authentication, OAuth 2.0, X.509 or SAML single sign-on, and OAuth 2.0 needs a trust relationship set up in the Administrator work center. [P706-D05] [P706-D06]
- Limits to plan for
- SAP Emarsys sets 1000 requests per minute for each API key and answers 429 Too Many Requests above it. Update Contacts takes up to 1000 contacts and 8 MB per call. An external event request takes up to 1000 objects and a 1 MB payload. [P706-D02] [P706-D03] [P706-D04]
- Deprecation to know
- SAP has announced the deprecation of WSSE authentication for the SAP Emarsys API, with the final sunset at the end of 2026. HiveSilo uses the OpenID Connect route: an OAuth 2.0 client credentials token sent as a Bearer header. [P706-D01]
- Control stays with you
- The credentials, privileges and technical roles live in your SAP account. Your administrator decides what the integration may write and can change or remove that access in SAP. [P706-D01] [P706-D05]
Where each HiveSilo capability meets SAP CX
Each row pairs a published HiveSilo capability with the SAP feature it works with, and names the SAP product. Scope is agreed for each client. Rows that read from SAP need a separate permission from your administrator.
| HiveSilo capability | SAP CX feature it works with | What you gain |
|---|---|---|
| Buyer intelligence and three-tier qualification | SAP Emarsys: contact fields, including custom fields made with Create a Field. SAP Cloud for Customer: extension fields on the lead service | Marketing and sales see a buyer score and a Tier 1, Tier 2 or Tier 3 qualification on the contact or lead they already use. [P706-D02] [P706-D08] [P706-D07] [HSF1] |
| AI firewall, bot defense and site protection | SAP Emarsys: contact creation through Update Contacts with create_if_not_exists | Invalid traffic is screened before it becomes a contact your programs and people have to work. [P706-D02] [HSF1] |
| AdBrain | SAP Emarsys: contact fields your team creates for campaign and source, and contact lists filled through Add Contacts to a Contact List | Your own SAP Emarsys lists and reporting can compare sources by qualified demand as well as by volume. [P706-D08] [P706-D10] [HSF1] |
| Offline conversions, qualified-demand scaling and outcome measurement | SAP Cloud for Customer: the Opportunity object, which the OData API v2 reference lists against the opportunity service | With a read permission you grant, opportunity outcomes can inform the qualified-buyer feedback sent to supported advertising platforms. [P706-D06] [P706-D07] [HSF1] |
| Revenue Seeker | SAP Emarsys: Get Contact Data. SAP Cloud for Customer: OData queries and reads | With a read permission you grant, SAP can be one of the authorized sources searched for revenue opportunities, which go to your own salespeople. HiveSilo cannot see those records. [P706-D09] [P706-D06] [HSF1] |
| AI Governance & Control | SAP Emarsys: external events, and List Uses of an External Event, which names the programs and emails an event starts | Your team can see exactly what an event triggered by HiveSilo sets in motion, and a person decides the outreach. [P706-D03] [P706-D11] [HS6] |
| Business insights and oversight | SAP Cloud for Customer: OData API Monitor, which logs inbound calls with status, time, user, method and path for one hour once activated | Your administrator can inspect what the integration sent, call by call, inside your own tenant. [P706-D14] [HSF1] |
| Client-controlled privacy and verification | SAP Emarsys: API credentials with access privileges. SAP Sales Cloud Version 2: an API user with technical roles | Customer identities stay in your SAP account and your confidential environment, outside HiveSilo's visibility, and your administrator can withdraw access. [P706-D01] [P706-D05] [HS4] [HSF1] |
How the buying signals are captured and linked
Lightweight first-party instrumentation on your own website reads pseudonymous behavior from your visitors. HiveSilo scores those non-PII signals. Anything that could identify a person travels from your website into your own per-tenant confidential enclave, not into HiveSilo's shared platform.
An anonymous session has a score but no SAP record. The link is made when the visitor identifies themselves on your website, for example through an enquiry form. That match happens inside your enclave, and the scored SAP Emarsys contact or SAP sales lead is written to your account from there. [HS3] [HS4]
What your SAP CX team does
The connection is configuration in your SAP account plus activation on the HiveSilo side. These are the steps on your side. Skip the ones for SAP products you do not run.
- Create SAP Emarsys API credentials.Your account owner creates OpenID Connect API credentials on the Security Settings page and grants only the access privileges the agreed calls need. A missing privilege returns 403 Forbidden. [P706-D01]
- Add the score fields.In SAP Emarsys, create the fields for score, tier and reason in the Field Editor or with the Create a Field endpoint. In SAP Cloud for Customer, add extension fields on the individual lead service. [P706-D08] [P706-D07]
- Agree the key field.Name the field that identifies a contact in SAP Emarsys. A custom field used as the key has to be indexed, which SAP Emarsys handles through a support ticket. [P706-D02]
- Create the external event and any contact list.Your marketing team creates the external event and the list in SAP Emarsys and decides what they start. List Uses of an External Event shows the programs and emails attached to an event. [P706-D03] [P706-D10] [P706-D11]
- Grant access in your SAP sales product.SAP Sales Cloud Version 2: create an API user under Technical Users and assign technical roles. SAP Cloud for Customer: choose the authentication method; OAuth 2.0 needs a trust relationship set up in the Administrator work center. [P706-D05] [P706-D06]
- Test first.The SAP Emarsys API reference lists a Mock Server beside the Live Server for trying request shapes. In SAP Cloud for Customer, the OData Console tests a service from the OData Service Explorer, and OData API Monitor logs inbound calls for one hour once activated. [P706-D12] [P706-D13] [P706-D14]
- Switch on production.Once the test result is accepted, confirm the production credentials and privileges and the agreed scope goes live. [P706-D01]
HiveSilo's published typical deployment is approximately 72 hours to set up and 7 days to live mapping and go-live, subject to fit, customer readiness and agreed scope. The SAP steps above run on your own change process. [HSF1]
Who, what, when, where, how and why
- Who
- Enterprises that run SAP Emarsys, SAP Sales Cloud Version 2 or SAP Cloud for Customer and want those teams to see buying intent from the company website. Your SAP administrator or account owner grants the access. [P706-D01] [P706-D05]
- What
- A scored contact or lead, a buyer score, an intent tier, a short reason for them, a suggested next step, and campaign and source context. [P706-D02] [HS1]
- When
- When a visitor identifies themselves on your website, for example through an enquiry form, and again when a returning buyer's score changes. [HS1]
- Where
- In your own SAP Emarsys account or SAP sales tenant, on the contact or lead your teams already use. No second customer database is created for them to check. [P706-D02] [P706-D06] [HS4]
- How
- Outbound calls to the APIs SAP documents. For SAP Emarsys that is an OAuth 2.0 client credentials token from https://auth.emarsys.net/oauth2/token, then Bearer calls to the v3 API. [P706-D01]
See the intelligence behind the next move
One SAP Emarsys contact per buyer.
HiveSilo sends the contact through the Update Contacts endpoint with create_if_not_exists set, so SAP Emarsys updates a known contact and creates an unknown one. The key field that identifies the contact is the one your administrator selects. [P706-D02]
Useful output: A contact carrying a current buyer score and intent tier in fields you choose.
An event your programs can use.
SAP Emarsys documents an external event trigger for a specified contact, with a trigger_id for deduplication. HiveSilo can call an event your team has created. What that event starts is configured in SAP Emarsys by your team. [P706-D03]
Useful output: An external event triggered for the contact when the agreed intent condition is met.
Sales access set by your administrator.
For SAP Sales Cloud Version 2 an administrator creates an API user with technical roles. For SAP Cloud for Customer the OData API reaches the Lead object, and extension fields are added on its lead service. In both, the scope is what your administrator assigns. [P706-D05] [P706-D06] [P706-D07]
Useful output: A scored lead in the SAP sales product you run, within the roles you grant.
Two new contacts. One welcome program. Who gets a call?
Illustrative workflow: two people submit the same enquiry form within an hour. Both become contacts in SAP Emarsys. One shows strong buying intent and is qualified Tier 1; the other shows little and is Tier 3.
Start with SAP CX
SAP Emarsys stores both contacts and runs the programs your team has built. That process stays as it is.
Bring the relevant context together
- The contact as it exists in SAP Emarsys, with its opt-in status and source.
- HiveSilo's score and Tier 1, Tier 2 or Tier 3 qualification for the website sessions behind each enquiry.
- A short reason for each score, including any invalid-traffic concern.
Make the decision
The team routes the Tier 1 buyer to a sales follow-up and leaves the second contact in the standard program.
A useful output
Two contacts whose fields show score and tier, and an external event triggered for the Tier 1 buyer.
Keep responsibility clear
Your marketing team owns the program the event starts, and the lead owner decides the outreach. HiveSilo supplies evidence; it does not send messages on their behalf in this workflow.
Hold and ask
Hold automated outreach when the score is low, the traffic-quality concern is unresolved or the contact's opt-in status does not permit it.
Record the outcome
Your team records the outcome in SAP as usual, so your own SAP reporting can compare score with result. HiveSilo does not read that outcome back in this workflow. [P706-D02] [P706-D03]
Require control before AI acts.
A score informs your team. It does not act for them.
Decide in advance which SAP actions a score may start and which need a person. Writing a contact field is different from triggering an event that sends an email. In SAP Emarsys, grant the API credentials only the privileges those calls need. In SAP Sales Cloud Version 2, assign the API user only the technical roles the agreed writes require, and route anything outside that scope to the named owner first.
Request
An AI proposes an action
Check
Policy and authority
Approve
Named owner, when required
Act
Within permitted scope
Record
Keep the action, outcome and accountable owner traceable.
Unclear authority? Hold the action.Resolve with the named, authorized owner before proceeding.
Controls apply to actions routed through the configured HiveSilo boundary.
Read the governance and escalation requirements
Make accountable authorization a condition of putting AI to work. HiveSilo describes an operating layer that combines buyer intelligence, customer-data privacy and governance. Your deployment should establish the responsible owner and permitted scope before an agent can change records, contact buyers or trigger campaigns.
HiveSilo documents policy checks before execution, default denial when authorization is unclear, human checkpoints, scoped stop controls and decision receipts. These controls apply to actions routed through its policy boundary. Keep decisions, required approvals and held actions traceable as the workflow progresses, then record the action, outcome and accountable owner. [HS6][HS7]
- Who
- Identify the acting agent or person and name the business owner accountable for this workflow.
- What
- Define the action and permitted data categories before execution.
- Where
- Specify the approved system, destination and customer custody boundary.
- How
- Require an approved execution path, access scope and applicable policy checks.
- When
- Set the permitted conditions and approval validity; recheck authority before a held action resumes.
- Why
- Record the business purpose and the basis for allowing, denying or holding the action.
An edge case should stop the affected action.
For the deployment, require unresolved authority, an unapproved destination or an out-of-policy action to remain on hold. A timeout or unanswered approval request must not become permission to proceed.
Who gets the question?
Agree a named owner and authorized delegate for each workflow. A proposed responsibility model is: sales for buyer outreach and lead handling; marketing for campaign spend and audiences; security or privacy for data-access exceptions; the platform owner for connector or runtime changes. Test the escalation route. If no authorized reviewer is available, keep the action held.
Named-owner routing is configured and demonstrated for each deployment. Governance covers actions routed through its configured boundary; external systems remain responsible for actions outside that scope.
Make responsibility part of the AI rollout.
Use the AI implementation layer to put policy checks, approval checkpoints and decision records around the actions in scope. Your enterprise agreement defines the legal responsibilities and any agreed liability allocation or transfer. [HS7][HS10]
Explore the AI implementation layer · How enterprise agreements govern the engagement
Your client list stays yours.
Your SAP customer record stays in your SAP account.
Explore the security architectureYour client records stay with your business under HiveSilo’s published architecture.
How your data stays under your control
The contact's or lead's identity is written to your own SAP account from the environment you control. HiveSilo's shared platform receives permitted non-PII signals and scores. SAP privileges, technical roles and opt-in settings continue to govern who can read and act on what is written. [P706-D01] [P706-D05] [HS3] [HS4] [HS4]
Your controlled environment
Customer identities stay in your SAP account
Identities and re-identifiable records stay here.
Your enclave. Your keys.Only permitted non-PII signals and scoresPermitted non-PII website signals and buyer scores
HiveSilo intelligence
HiveSilo: buyer score, tier and reasons
Published architecture. Confirm the data boundary for your deployment.
Customer-controlled keys
Documented BYOK options cover AWS, Azure and GCP. Review key ownership, revocation and the deployment's access policy with your security team. [HS3]
Protected processing
The architecture describes confidential computing and trusted execution environments. Request deployment-specific attestation and data-flow evidence for your CISO's review. [HS3]
Scoped destinations and actions
Agree which systems receive outputs and what actions are authorized. Keep identity handling within the documented customer boundary. [HS2][HS4]
Control through the full relationship
Review permitted use, export, retention, deletion and offboarding terms. Customer-controlled keys are one control; they do not establish every contractual exit right. [HS3][HS4]
The contact's or lead's identity is written to your own SAP account from the environment you control. HiveSilo's shared platform works with permitted non-PII signals and scores. Your administrator sets what the integration may write, opt-in status remains managed in SAP, and SAP's own roles and privileges continue to apply to everyone who reads the data.
An SAP CX review of the connection should confirm which product is in scope and the privileges or technical roles the API credentials hold. [P706-D01] [P706-D05] [HS3] [HS4]
Customer identity custody is separate from HiveSilo account, billing and support records. Re-identifiable pseudonymous data is not anonymous.
What you could gain.
Bring website buying evidence to the SAP CX contact and lead, so the program, the first call and the source review start from the same facts.
Explore HiveSilo case studiesContact HiveSiloSharper scoring. Clearer intent.
3,790 of 5,000 · UHNW buyer scoreIllustrative score
Rank new SAP Emarsys contacts and SAP sales leads by observed buying intent before the first touch.
Find more clients like your best.
4–6× · Reported conversion liftClosed-revenue outcomes
Find the sources and pages your strongest SAP CX contacts have in common, then do more of that.
Put more of your budget to work.
Up to 31% · Reported ad-spend savingsBot and invalid-traffic filtering
Review spend on sources whose contacts score low and rarely progress in SAP.
Keep evolving your protection.
99.9999% · Bot detectionObserved client results
Screen invalid traffic before it becomes an SAP contact your programs and people have to work. Goal, not an achieved result: toward 99.9999999% bot detection as the hive evolves. Observed client results vary.
Find revenue in data you already own.
5–21% · Revenue lift from existing dataHiveSilo-reported client results
Revisit existing SAP contacts whose website behavior shows renewed interest.
Published outcomes include client-reported results and illustrative, unaudited ranges. The owned-data revenue range was supplied by HiveSilo; request the measurement context in your briefing. Results vary.
Measure what matters
Define the result. Then require the evidence.
Focus on better-directed follow-up, less acquisition waste, protected customer identity custody and accountable AI execution. Agree the baseline, success measures and scope for your business.
- CEO: a clearer decision about the opportunities that merit attention.
- CFO: an agreed baseline, evaluation costs and attributable outcomes before any ROI claim.
- CTO: a demonstrated, permitted connection and a usable handoff into the agreed system.
- CISO: verified identity custody and pre-action authorization, with tested hold, approval and revocation behavior.
Explore HiveSilo’s published outcomes and the measurement context behind them. [HS5][HS8][HS9]
Make your next conversation count.
Bring your SAP CX workflow. Map the decision, the data you control and a measurable next step with HiveSilo.
Enterprise CRM & customer data · Sales, marketing operations, technology & security
Mention SAP CX and your business question.
No client records or credentials.
A closer look,
when you need it.
Product scope, a practical workflow and source-backed answers for your team and its research tools.
Reviewed
Contact HiveSiloSAP CX connection & briefing scope
Agree the SAP product, the fields and the access.
Confirm which SAP CX product is the target: SAP Emarsys, SAP Sales Cloud Version 2 or SAP Cloud for Customer. Then name the field that identifies a contact, the fields that will hold the score, tier and reason, and any external event to trigger. Your administrator creates the credentials or API user and grants only the privileges or technical roles those writes need.
The connection is available and is activated for each client on request. Public documentation establishes what the SAP APIs support; your configured account, your agreements with SAP and your agreement with HiveSilo determine the scope that is switched on.
When you review SAP CX with HiveSilo, ask which marketing or sales decision a website buyer score would change. [P706-D01] [P706-D05] [HS3] [HS4]
[P706-D01] [P706-D02] [P706-D05] [HS10]
A useful fit when
Most useful where an SAP CX product is the system of record and the website is a material source of contacts and leads.
- Enterprises that run customer programs in SAP Emarsys and want a first-party intent signal to start them.
- Businesses with high-value sales where contacting the right buyer first changes the result.
- Teams able to name the fields, the event and the decision a score should inform.
Consider the fit
- SAP's own segmentation, automation and lead management may already answer the question for some teams.
- The SAP Emarsys request limit applies to each API key, so plan volumes with your other integrations in mind.
- A custom match field in SAP Emarsys has to be indexed before it can identify contacts, which SAP handles through a support ticket.
- SAP CX covers more products than the three named here. Ask about any other product before assuming it is in scope.
In your enquiry, name SAP CX and the business decision. Please leave out client records, credentials and sensitive samples.
Eight questions before your briefing
1.Does HiveSilo connect to SAP CX?
Yes. The SAP CX connection is available and is activated for each client on request. It covers SAP Emarsys, SAP Sales Cloud Version 2 and SAP Cloud for Customer, using SAP's documented APIs with access your administrator grants. [P706-D01] [P706-D05] [P706-D06] [HS2]
2.Which SAP CX products does this page cover?
Three. SAP Emarsys, through its v3 contact and external event endpoints. SAP Sales Cloud Version 2, through an API user with technical roles. SAP Cloud for Customer, through its OData version 2 API. Other SAP CX products are not described here. [P706-D02] [P706-D03] [P706-D05] [P706-D06]
3.Which SAP objects and features are in scope?
In SAP Emarsys: contacts and their fields through Update Contacts, custom fields, contact lists and external events your team has created. In SAP Cloud for Customer: the Lead object and its extension fields through the OData API. In SAP Sales Cloud Version 2 the scope is set by the technical roles of the API user. Other objects are agreed for each client. [P706-D02] [P706-D03] [P706-D05] [P706-D07] [P706-D08] [P706-D10]
4.Will it create duplicate contacts in SAP Emarsys?
Update Contacts with create_if_not_exists updates a contact that exists and creates one that does not. SAP Emarsys recommends identifying contacts by a unique field and cautions that near-simultaneous calls for the same identifier can conflict, so the key field is agreed with your administrator. [P706-D02]
5.How is access granted and removed?
In SAP Emarsys your account owner creates OpenID Connect API credentials in Security Settings and grants privileges. In SAP Sales Cloud Version 2 an administrator creates an API user and assigns technical roles. Both are managed, and can be withdrawn, in your SAP account. [P706-D01] [P706-D05]
6.Does HiveSilo read data back from SAP?
Not in this workflow. HiveSilo writes the score, tier and explanation; comparing score with outcome happens in your own SAP reporting. Reading would be a separate permission you grant, for example through Get Contact Data in SAP Emarsys. Calls use the OpenID Connect route; SAP has announced that WSSE authentication reaches its final sunset at the end of 2026. [P706-D01] [P706-D09]
7.Can the SAP connection be tested before production?
Yes, with the facilities SAP documents. The SAP Emarsys API reference lists a Mock Server beside the Live Server. SAP Cloud for Customer provides the OData Console for testing a service and OData API Monitor, which logs inbound calls, requests and responses for one hour once activated. [P706-D12] [P706-D13] [P706-D14]
8.Is HiveSilo listed on an SAP marketplace or in an SAP partner program?
No listing or program membership is claimed. This connection is set up directly in your SAP account with credentials your administrator creates and controls. [P706-D01] [P706-D05]
Sources, scope & verification
- SAP Help Portal: Introduction to the SAP Emarsys API [P706-D01]
SAP Emarsys API authentication is based on OpenID Connect: an OAuth 2.0 client credentials call to https://auth.emarsys.net/oauth2/token returns a JWT sent as a Bearer token to https://api.emarsys.net/api/v3/ endpoints; API credentials are created on the Security Settings page and need access privileges or calls return 403 Forbidden; WSSE authentication is deprecated with a final sunset at the end of 2026.
Reviewed November 2026
- Emarsys Core API Reference: Update Contacts [P706-D02]
PUT https://api.emarsys.net/api/v3/contact/ updates multiple contacts or creates them when create_if_not_exists is set to 1; key_id identifies the contact; a custom field used as key_id has to be indexed through a support ticket; the maximum payload is 8 MB and the maximum batch is 1000 contacts per call; the page cautions that create_if_not_exists can cause race conditions.
Reviewed November 2026
- Emarsys Core API Reference: Trigger an External Event [P706-D03]
POST https://api.emarsys.net/api/v3/event/{eventId}/trigger activates a named external event for a specified contact; the contact must already exist; the optional trigger_id is used for deduplication and event_time sets the time of the event; the maximum is 1000 objects per request and the payload is limited to 1 MB.
Reviewed November 2026
- Emarsys Core API Guides: Miscellaneous [P706-D04]
A limit of 1000 requests per minute for each API key, with requests over the limit blocked with 429 Too Many Requests; a general 10 MB request payload limit; the OAuth token fetch endpoint allows 50 requests per minute and 200 per hour per client_id and 10,000 per day per customer_id; only TLS 1.2 is accepted.
Reviewed November 2026
- SAP Help Portal: Set Up Guide for SAP Sales Cloud Version 2, Create Technical Users and Assign Technical Roles [P706-D05]
In SAP Sales Cloud Version 2 an administrator creates an API user under All Settings, Users and Control, Users, Technical Users and assigns technical roles; an API user has no access to the application UI; for inbound API communication API users can authenticate with the OAuth 2.0 client credentials flow, with a Client ID and a Client Secret that is displayed only once.
Reviewed November 2026
- SAP Help Portal: SAP Cloud for Customer OData API [P706-D06]
The SAP Cloud for Customer OData API conforms to the OData version 2 specification and is reached at https://<your_tenant>/sap/c4c/odata/v1/c4codataapi; it can query, read, add, update and delete data; authentication options are Basic Authentication, OAuth 2.0, X.509 and SAML based single sign-on, and OAuth 2.0 requires a trust relationship configured in the Administrator work center.
Reviewed November 2026
- SAP Help Portal: SAP Cloud for Customer OData API v2 Reference [P706-D07]
OData API v2 covers over 40 main business objects with read and/or write access; the c4codataapi service is a container for individual object-specific OData services, so extension fields must be added to the individual service; the table lists Lead against the service named lead, Opportunity against opportunity, Contact against contact and Task against activity.
Reviewed November 2026
- Emarsys Core API Reference: Create a Field [P706-D08]
POST https://api.emarsys.net/api/v3/field creates a new field in the contact database, one field per call, with application_type values shorttext, longtext, largetext, date, url and numeric; single-choice and multi-choice fields cannot be created through the API; the endpoint replicates Admin, Field Editor, Create Field.
Reviewed November 2026
- Emarsys Core API Reference: Get Contact Data [P706-D09]
POST https://api.emarsys.net/api/v3/contact/getdata returns the field values of contacts specified by their internal identifiers or by a custom property; the maximum number of objects per request is 1000.
Reviewed November 2026
- Emarsys Core API Reference: Add Contacts to a Contact List [P706-D10]
POST https://api.emarsys.net/api/v3/contactlist/{listId}/add adds contacts to an existing contact list, identified by key_id and external_ids; the number of items must not exceed 1000.
Reviewed November 2026
- Emarsys Core API Reference: List Uses of an External Event [P706-D11]
GET https://api.emarsys.net/api/v3/event/{eventId}/usages lists the identifiers of the Automation Center and Interactions programs and the emails that the specified external event triggers or is used in; emails must be in the launched state to appear.
Reviewed November 2026
- Emarsys Core API Reference: Events endpoint batch [P706-D12]
The endpoint batch page gives the API Base URL as a Live Server, https://api.emarsys.net/api, and a Mock Server, and states that the API needs an OAuth 2.0 client credentials token from https://auth.emarsys.net/oauth2/token.
Reviewed November 2026
- SAP Help Portal: SAP Cloud for Customer, Testing an OData Service [P706-D13]
The OData Console opens from the test button in OData Service Explorer, lists the SAP delivered and custom services in the SAP Cloud for Customer tenant, shows the entities and properties of a service and lets a user perform HTTP operations such as Get and Post to test it.
Reviewed November 2026
- SAP Help Portal: SAP Cloud for Customer, OData API Monitor [P706-D14]
OData API Monitor is available in the tenant by default and is launched from Administrator, General Settings; once activated, all inbound calls, requests and responses are logged for one hour, showing HTTP status code, time, user, HTTP method and path, with the request and response payload viewable per entry.
Reviewed November 2026
- HiveSilo capability overview [HSF1]
Published HiveSilo capabilities: buyer intelligence with Tier 1, Tier 2 and Tier 3 qualification, Revenue Seeker, AdBrain, offline conversion feedback, AI Governance & Control, bot defense, business insights and client-controlled privacy; typical deployment of approximately 72 hours to set up and 7 days to go-live, subject to fit, readiness and scope.
Reviewed November 2026
- HiveSilo: industry coverage [HS0]
First-party description of buyer intelligence across 12 luxury niches.
Reviewed October 2026
- HiveSilo: platform [HS1]
Published intent, sales-prioritization and traffic-quality capabilities.
Reviewed October 2026
- HiveSilo: integration scope [HS2]
Named destinations, scoped activation and customer-controlled dispatch.
Reviewed October 2026
- HiveSilo: security architecture [HS3]
Documented confidential processing, BYOK and customer control.
Reviewed October 2026
- HiveSilo: data handling [HS4]
Customer identity custody, pseudonymous-data boundaries and separate account records.
Reviewed October 2026
- HiveSilo: published outcomes [HS5]
Existing first-party outcomes material, with client-reported and illustrative descriptions.
Reviewed October 2026
- HiveSilo: AI agentic governance [HS6]
Published pre-action policy checks, default denial, human checkpoints, scoped stop controls and governance receipts.
Reviewed October 2026
- HiveSilo: AI implementation layer [HS7]
Published combined implementation model for intelligence, confidential processing and AI governance.
Reviewed October 2026
- HiveSilo: bot-detection results and buyer-score specimen [HS8]
The homepage presents 99.9999% bot detection as observed client results, 99.9999999% as a goal, and a 3,790-of-5,000 UHNW buyer-score specimen.
Reviewed October 2026
- HiveSilo: owned-data revenue result briefing [HS9]
HiveSilo supplied a 5–21% client revenue increase range for existing-data workflows in October 2026.
Reviewed October 2026
- HiveSilo: enterprise agreements and responsibility [HS10]
Signed enterprise agreements govern the engagement and take precedence over website summaries.
Reviewed October 2026
Vendor sources describe their own product. The workflows on this page describe a HiveSilo application, scoped to customer permissions, contracts and the selected product edition.
HiveSilo’s reported outcomes retain their original measurement context; the illustrative score and future bot-detection goal are identified in the outcomes section.
Independent HiveSilo use-case page. SAP CX is identified to explain the workflow; no endorsement, certification or partnership is implied.
Your next move starts with a conversation.
Contact HiveSilo